Posts Tagged ‘Electrical’

• outlet (connection)

The electrical connection of an outlet, is very simple.

To begin simply keep the positive cable (+) to the outlet, fit well.

From the other end of a cable to the negative or neutral (-).  Read the rest of this entry »

It is a steel bar copper nails on the floor and connected to the grounding cable. One of the basic elements of protection in an electrical installation.

The grounding cable is connected at the top of the javelin, and Read the rest of this entry »

When working on electrical parts and connections, always turn the power off at the circuit panel or fuse box.

This section is designed to teach homeowners the basic parts description, and general knowledge of each item. It doesn’t cover all variables, so if your project is not a simple replacement of a specific part, please consult an qualified electrician. Before coming in contact with any live wires, always check (with a volt/ohm meter) to make sure your wires are dead even after or turn the power off at the panel box. Never change the size of a fuse or circuit breaker, always replace with the same size. If you’ve removed a 20 amp, replace it with a 20 amp. Read the rest of this entry »